flarione.ru → Signs

How to dye fur at home with paint. How to dye fur at home - basic methods

Any fur item looks very beautiful and expensive on any girl, and you can wear it for many years. However, such things have a huge drawback - after long wear, the fibers begin to fade and lose their original appearance. From this article you will learn how to dye arctic fox fur at home, so that you can continue to enjoy showing off in a warm, beautiful thing.

Preliminary preparation

Before you start painting a fur product, you need to prepare it, namely, get rid of all dust and dirt on the fibers. Otherwise, after the painting procedure, unpleasant stains and stains may form on the product, causing it to lose its former attractiveness even more.

So, for the cleaning procedure of a fur garment, you need to prepare an alkaline solution. For a liter of water, the following proportion must be observed:

1 tsp. dishwasher or laundry detergent;
5 g of ammonia;
12 g table salt;
10 g soda.

Important! If you don’t have ammonia and soda at home, prepare a solution that requires other ingredients in equal proportions:

Alcohol.

Vinegar.

The cleaning process is as follows:

Mix all ingredients.
Received liquid mixture Apply to the entire area of the fur product using a brush.
Rinse the product with clean water.

Important! To avoid drying out, lubricate the inside of the product with some rich hand cream.

Let's move on to painting

Although any fur is a delicate material, you can dye arctic fox fur at home, and even in different ways. Now we will talk about them.

Universal method

Since animal fur is very similar in structure to human hair, it is better to use good hair dyes to dye fur at home. This method is suitable for dyeing the fur of arctic fox, mink and rabbit.

Important! Don't forget to pay attention to the structure of the villi. For example, mink fur and arctic fox fur have stiffer hairs, which cannot be said about rabbit or silver fox. For this reason, two packages of dye may be needed.

The first step is to make sure that the desired shade is selected. For this reason, before starting to dye the entire garment, test the effectiveness of the substance on an inconspicuous area of the garment. Further:

Apply paint using a brush.
Spread the mixture over the surface with your own hands.

Important! For this it is better to use gloves.

Leave the substance on the product for as long as it is written on the packaging.
Rinse the item thoroughly with clean warm water.
Leave it to dry.

Important! When drying, it is better not to use fans or hair dryers - this will only harm the pile.

After the product has dried, you need to place it in a solution of warm water and vinegar - this will help fix the paint on the pile and extend the wear period.

Important! To add extra shine to mink, rabbit or arctic fox fur, you can use hair conditioner. To do this, apply a solution of water and balm to the fur, leave for several minutes and rinse it off.

It is better to dye fur at home with hair dye in natural, basic colors. Otherwise, the fur may not behave as you wish. For example:

Mink fur may turn yellow due to being dyed a light color and lose its expensive appearance forever.
On the contrary, you can experiment with white rabbit fur, giving it different shades, however, it is strictly forbidden to lighten it.

Important! If you doubt your abilities and are afraid to carry out the dyeing procedure yourself, it is better to take the fur product to a special workshop where professionals will undertake this procedure.

Painting a mink

A mink fur coat is distinguished by its expensive looking and durability to wear. In order to dye mink fur at home, you need to stock up on the following materials:

Color-matching hair dye.
Spray.
Comb with frequent teeth.
Shampoo and hair conditioner.
Fat cream.

To dye a mink coat or hat, you must follow the given algorithm:

Pre-clean the item from grease and dust.
Treat the inside with rich hand cream.
Prepare hair dye according to the instructions on the package.
Lightly moisten the fur surface using the prepared spray bottle.
Now you can move on to the main procedure - start dyeing a mink coat at home. To do this, you need to apply the dye using the same spray bottle. The distance should be approximately 55 cm.
Even out the tone by going over the surface with a comb.
Wash off the dye with warm water and shampoo, rinse the product with a solution of water and hair balm.
Apply cream or glycerin to the flesh again.
Place the product on a flat surface and wait for it to dry.
Comb the pile in the direction of its growth.

Dyeing an arctic fox fur coat

The arctic fox coat lends itself most well to artificial dyeing. In order to paint it in the desired color, you need to prepare the following materials:

Hair dye that matches the shade of the fur product.
Glycerin or fatty cream.
Balm.
Gloves.
Brush for applying paint.
Vinegar.

To carry out artificial coloring of fur at home, you must follow the given algorithm:

Lubricate the inside with fatty cream or glycerin.
Stretch the material on a flat horizontal surface.
Wear protective gloves and begin applying the coloring composition, simultaneously smoothing out the lint with your hand.
Wait for the time indicated on the paint packaging.
Rinse the product in warm water.
Wash it in vinegar solution.
Treat your fur coat or hat with balm diluted in water, rinse off the solution after a couple of minutes.
Lubricate the inside with fatty cream a second time, stretch it and let it dry on its own.

Video material

From this article you learned many recommendations on how to dye the fur of a rabbit and other animals. As you noticed, artificial coloring- this is not such a complicated procedure as it seems at first. So go ahead, put your things in order, but do it carefully!

Happy owners of fur items know that they fade over time. To restore color, you don’t have to turn to professionals for help - you can do it at home. Knowing how to dye fur, you will give the product a second life at minimal cost.

Preparation

Before proceeding directly to painting, the fur must be prepared. Clean it thoroughly from dust and dirt so that the paint adheres well. For these purposes, you can use an alkaline solution.

For a liter of water you need to take the following components:

Mix all ingredients to obtain a homogeneous mass. It is convenient to apply it with a brush. Be sure to wash off the product. You can also use another composition: combine water, vinegar, and alcohol in equal proportions.

The wrong side, the inner side, also needs to be processed. It is necessary to apply glycerin or fatty cream to it.

This will prevent skin deformation. The fur must be pinned to a board so that the item does not lose its shape during the process of dyeing and drying.

If the interior is poorly painted, it will “shine”, creating the effect of sparse fibers. It can be tinted from the inside out. How to paint the inside of the fur? You can use a special product or apply hair dye after testing it on an inconspicuous area.

Using hair dye

It is often used to color arctic foxes. It is quite dense, so it is better to buy two or three packages so that the color is rich and uniform.

Before applying the composition to the entire surface, test it on a small piece.

You can see how it “behaves” when interacting with chemicals. Choose a paint one or two shades darker than the natural color - it will make its color richer.

If a thing has turned yellow, it is better not to paint it, but to lighten it. This can be done using hydrogen peroxide. Only after this is it necessary to apply the coloring composition of the appropriate shade.

How to apply paint?

Spray paint

Owners of items made from arctic fox fur sometimes notice that the tips begin to turn yellow. To restore the original appearance, it is not necessary to paint the entire product; it is enough to use suede paint from an aerosol can.

Is it possible to dye mink products?

Real fur is always in fashion. But over time, stylish mink items lose their rich color and shine. How to dye fur at home? There is nothing difficult about this if you follow the basic rules.

Often women dye their mink with regular hair dye. Before applying the composition, mink fur must be prepared in the same way as arctic fox fur. To make the procedure easier, you can use an aerosol or spray bottle. Spray the product at a distance of approximately 70 cm. Do not forget to comb the hairs with a brush or at least rub them with your hands. To dry, you can use a hairdryer or allow it to dry naturally. Hair balm applied to the surface will give shine and softness. Be sure to rinse it off thoroughly.

How to dye faux fur

Products made from it are very popular due to their attractive appearance and reasonable cost. But over time, faux fur needs painting.

If you want to radically change the color of the product, choose hair dye with a high degree of durability. To refresh the shade, a tinting shampoo is suitable.
Pre-clean the product from dust and dirt with a swab soaked in shampoo. Apply the coloring composition to a small area to evaluate the result.
In order for the entire surface to be painted well, the product must be well stretched and fixed. Run the brush in the direction of the grain, grabbing the fabric as well. Follow the dyeing time specified in the instructions and rinse the fur thoroughly. Brush the wet bristles with a brush and let the product dry.

If you know how to dye real or faux fur, your items will always look fresh and neat.

Fur products have always been distinguished by their invulnerability to high temperature changes and other factors. external environment, however, sooner or later the fur on them may fade, lose its former shine, become stained, or simply shed. However, the loss of color in a fur coat is not a death sentence at all, and you can restore its former brightness without turning to specialists. And today we will look at how to paint real fur(using the example of mink and arctic fox) and artificial in the most effective ways.

We dye products made from arctic fox fur

In case of very severe contamination or discoloration, it is necessary to treat its surface with some alkaline solution. Coloring elements do not penetrate well into the structure of oily or dirty hair. Therefore, to achieve an impeccable result, you need to make an appropriate solution. The cleaning product is prepared as follows:

Add 2 teaspoons of salt to 1 liter of water.
1 teaspoon of ammonia and the same amount of detergent.
2 teaspoons baking soda

The resulting substance should be applied to the fur with a brush. This product dries naturally.

When processing the inside of a fur coat, you should first treat it with glycerin or fatty cream. This is done in order to prevent it from drying out.

Which color is better to choose?

The answer to this question is ambiguous. In any case, the final choice is yours. However, experts recommend painting the arctic fox in dark colors. If you want to dye your fur coat a lighter shade, pre-treat it with hydrogen peroxide.

Before dyeing fur at home, you need to thoroughly wet the fur coat in water. Apply regular hair dye to the surface of the fur. You should not hesitate to apply this substance. Do not forget about safety measures - use rubber medical gloves when working. They can be purchased at almost any pharmacy individually or in packages of 100 pieces. When applying paint to fur, smooth the fur coat with your hand - this will allow the substance to spread more evenly over the surface. After this, it is necessary to soak the product for several minutes (as indicated on the instructions with the paint). Next, rinse the fur in warm water. It's best to add vinegar to it. Now you can move on to drying. To prevent the fur from shrinking in the future, carefully stretch it. Pin it in place if necessary.

How to dye mink fur?

Mink fur is very close in structure and appearance to human hair, so it should only be dyed using an aerosol or spray bottle at a distance of no less than 50 and no more than 80 centimeters from the surface. In order for the paint to be well absorbed into the material, you need to comb it thoroughly after each application of a new layer. Using a comb, the paint is more evenly distributed over the surface of a fur coat and other fur products, as a result of which they will look fresh and attractive. As we noted earlier, mink is very similar in structure to human hair. Because of this, you need to select a paint for it that would not harm its qualities. It is best to use a material that has been tested on your own curls, that is, regular hair dye. This is sold in almost every supermarket and market. The range and variety of colors will satisfy even the most capricious fashionista, so choose the appropriate option, and then feel free to apply paint to your fur coat.

Drying

As for drying, such restored products can be treated with a regular home hairdryer. At the same time, you should periodically comb the fur so that it does not mat in the future. To add shine to your fur coat, use hair balm. It will soften the fur well and make its color more saturated.

How to dye faux fur?

First of all, you need to decide what color you will dye this fur. Although in general the principle of work is no different from whether you repaint a fur coat completely or only partially treat its surface. The only difference is time.

How to dye faux fur? As in the case of natural hair dye, the best remedy is hair dye. If you want to make the color of your fur coat dark or light (that is, one that is very different in shade from the true one), use permanent options. If you are going to process the fur only partially, a regular tinting shampoo is quite suitable for such purposes.

So, you bought the right paint. What to do next? Before dyeing fur at home, you need to thoroughly degrease the surface of the fur coat and remove all dirt from it. To do this, use a cotton swab previously soaked in detergent or shampoo. And one more thing - before painting, it is better to check the color of the paint on a piece of paper in advance. Sometimes it happens that the bottle does not match the specified shade. Or you just won't like him. Then you will have the opportunity to change it, and in the meantime the fur coat will not suffer from double “torture”.

How to dye fur at home? When applying the material to the fibers, make sure that the fur is evenly distributed on the surface. To avoid unpainted areas, use a comb (same as with natural products). The material itself is applied with a brush in the direction of the fibers. Thus, the paint will capture not only the upper part of the fur coat, but also its fabric base.

Wait a few minutes until all the pigment is absorbed. The exact timing varies for each paint, so always follow the application instructions. After the paint is well absorbed into the fur, rinse it with water and, if necessary, treat with shampoo. If the fur coat can be washed well, you can put it in the washing machine. After this, comb the fibers with a comb and let the product dry. After drying, comb again. If the fabric base of the fur coat cannot be washed, remove any remaining paint from it with pieces of a cotton swab soaked in warm water.

Conclusion

So, we found out how to dye fur at home, as well as what products you need to have on hand for this.

Let's say your the fur coat has faded or you're just tired of it. Or perhaps you just want to give your fur clothing a fancy, unusual look? Or did they make it fur? Don’t you want to go to the dry cleaner to dye your fur? Try this at home by reading our tips.

DIY fur dyeing

Typically, fur is dyed in dark colors - black, brown or dark brown. Because then fur defects will be less visible. In addition, this is the basic rule for coloring fur - you can only dye it in a darker color.

Don't worry - this procedure is no more complicated than

All fur dyeing operations are carried out only in special longboats made of stainless steel or plastic barrels. There are two main methods for dyeing fur:

Dyeing with oxidative and dyeing with acid dyes.
Toning.

The first method is the most common. Firstly, it is cheaper, and secondly, fur is dyed using this method at lower temperatures. Fur dyed with oxidative dyes has a greater shine when compared with fur after acid dyeing.

There are now special ones in stores sprays for coloring fur products. But you should be aware that this method will inevitably stain everything the fur touches. Below you will see a video where the craftswoman did a great job with hair dye.

Important:

Before you dye your fur with your own hands, you need to check tanning capacity of hides on the welding temperature. Old skin may simply not withstand painting and fall apart during painting. The quality of fur dyeing largely depends on the ability of dyes to penetrate deep into the hair. The dye solution does not penetrate well into the structure of oily and dirty hair. To do this, you need to kill the skin.

Almost every woman has a fur item in her wardrobe. During prolonged wear, natural fur loses its attractiveness and becomes faded. Some fashionistas dream of changing the color, making it more fashionable and bright. It is quite possible to dye fur at home, the main thing is to adhere to the basic rules given below.

Preparing for coloring

Before you begin the dyeing process, you need to clean the item. This will allow you to paint the product evenly without leaving pale areas on it. A solution prepared from the following ingredients will allow you to carry out this procedure well:

salt (2 tbsp);
ammonia (1 tbsp);
baking soda (2 tablespoons);
washing powder (1 tbsp);
warm water in the amount of two liters.

The components are thoroughly mixed, then the mixture is applied to the fur with a brush, evenly distributing it over the entire surface. For effective cleaning, use a damp cloth or clean cloth to rinse the soap solution several times. In order for the core (skin) on the back side of the product not to shrink, it must be moist, so it should be wetted.

Interesting! You can clean the item with regular shampoo intended for hair or dishwashing detergent.

Some use aggressive substances: kerosene or lighter refill. With this method, you must always remember that their use can significantly worsen appearance products.

Dry fur collar or a fur coat on hangers in natural conditions, away from heating devices and sunlight on the street or in a room with good ventilation.

Types of fur

Before you paint this or that thing at home, you need to understand the characteristics of the material. Only in this case can you achieve the desired result and get the desired color or shade. The easiest items to dye are those made from rabbit, mink, and chinchilla. But the procedure should be carried out carefully, since these materials, especially rabbit fur, are highly sensitive to chemicals.

Important! Dying thick fur will require a lot of paint and time. But the result will please the owner of the wardrobe item with a good color that will last for quite a long time.

If the fur coat is made from beaver, you should not even try to lighten it, as it will acquire a yellow tint. The muskrat can behave very unpredictably, since not everyone may like the pinkish shades with whitish areas. After some time, the paint will fade and the product will take on a completely different appearance.

Arctic fox coloring

You can paint the arctic fox product in specialized workshops. The cost of such a service is quite high, and not every person can afford to pay a certain amount. There is a way out - you can perform the procedure at home yourself. To do this you need to do the following:

Choose the right paint. It is sold in hardware stores. If you can’t find a suitable color, there is another option - dyeing the fur at home with hair dye. Similar dyes are sold in a wide range of colors: black, red, golden, brown, red and other shades; choosing them will not be a problem.
Strictly following the instructions, dilute the dye.
Put a mask or respirator on your face and gloves on your hands.
It is recommended to treat the flesh with Vaseline, baby cream or glycerin. This will prevent the skin from getting too wet and protect it from drying out.
Dyeing can be done on both wet and dry arctic fox fur. In the first case, the paint lays on the surface quite softly. Apply the substance quickly using a hairdressing brush. This should be done carefully so that there are no unpainted areas left.
If you want to get a leopard color, use a stencil and several colored paints. Holes of different diameters are cut out of thick cardboard, applied to the surface of the product and painted with black and brown paints.
The Arctic fox can get a beautiful, rich shade if only the ends of the pile are painted. Typically, light-colored coloring compounds are used for this.
You can refresh a fur wardrobe item with a spray, painting only the ends. You need to purchase paint intended for suede, which comes in an aerosol. Holding the spray can at a great distance, you must do uniform movements. This is a simple and fast way.

After completing the procedure, the arctic fox fur is left for several minutes to obtain the desired shade. The time is indicated on the package. Now you should treat the product by preparing the following solution: dilute 5 tbsp in 2 liters of water. spoons of vinegar. As soon as it is ready, immerse the item in it.

Vinegar perfectly fixes the color, gives the fur additional shine and softness, greatly improving the appearance of a fox fur coat or collar. To prevent the item from becoming deformed, the flesh is stretched on the table, secured with clothespins.

To give the Arctic fox a lighter tone, use a hair lightener, which is diluted in accordance with the instructions. You can use hydrogen peroxide, diluting it with water in a ratio of 1 to 3. The prepared product is applied to the product and left for no more than 15-20 minutes, otherwise the villi will become brittle. After the time has passed, the fur is rinsed and sent to dry.

Dyeing a mink coat

Faded mink fur spoils the appearance of a fur coat. In order to restore color and shine, a simple procedure is performed - painting a mink coat. It is necessary to purchase in advance the desired shade of paint, a spray bottle, a comb with thick teeth, rich cream or glycerin, shampoo and hair conditioner. Now you need to do the following steps:

clean the item from dust, dirt, grease;
treat the skin (inner space) with a greasy substance;
prepare the coloring composition in accordance with the instructions;
moisten the surface of the product;
apply a dye to the pile using a spray bottle;
comb hairs;
wash off the paint with shampoo diluted with water;
treat the surface with balm.

The procedure is completed, all that remains is to dry the product, after applying the cream to the inside and combing the hairs.

In the same way you can dye silver fox fur, products made from mouton and any other material. For silver fox, the paint chosen is mainly black or brown. For a mouton fur coat, dark reddish shades and chestnut color are best suited.

Dyeing a fur collar

It is not always necessary to completely paint an item. In some cases, it is enough to dye a fur collar at home. This is quite easy to do using regular hair dye. First, the collar is cleaned of dust and dirt, dried, and then the dyeing process begins:

Using the instructions, you need to dilute the paint.
For uniform coloring, the collar is slightly moistened with water.
The coloring composition is applied by hand (you should first put on gloves). The process should be done quickly, distributing the paint well throughout the pile.

After completing the procedure, the collar is washed well with water and rinsed in a vinegar solution or hair conditioner. It should be dried on a flat surface, stretched and pinned to the base with needles.

Faux fur

Some people prefer to buy faux fur products. In many characteristics it is not inferior to natural raw materials and sometimes even surpasses them. It can also be colored using hair dye. First you need to select the tone of the dye, clean the product, removing dirt, dust, and grease from it, using a soap solution. After this, remove the remaining soap solution with a damp swab.

Treatment should be carried out one day before staining.

However, you should know that faux fur is dyed in dark colors. You should buy high-quality paint, so as not to spoil the thing.

The coloring composition is obtained by strictly following the instructions. After this, it is applied to the artificial fur with a brush, making movements in the direction of the pile, evenly distributing it. The brush should be pressed so that it touches the fabric base. The paint is left for the time recommended in the instructions, then the material is washed with water, and if necessary, excess paint is removed with cotton swabs. After this, the still damp fibers are combed with a sparse comb and the product is sent to dry.