How to dye faux fur? Tips and methods for dyeing fur at home: how to dye a fur coat at home? How to dye a fur collar at home.

Fur dyeing at home

Many people probably already have a couple of dozen things accumulated in their closets. And it seems a shame to throw it away, and it’s no longer possible to wear it. It is possible that you will show your talents and decide to create something completely new and unique from an old fur item, but this will not make the fur the same color. You can, of course, contact a specialist and he will return it to its former beauty. This requires financial investments. But you can resort to another method and dye the fur at home.

Fur products always attract attention. No wonder, because they look beautiful and rich. And in the cold season they also warm well, and there is no need to make a choice between beauty and warmth. But, like any thing, over time they lose their properties. The product may still be neat and look decent, but the color changes. And this pretty much spoils the original appearance.

How to determine fur color?

First you need to determine what color you want. It is recommended to paint fur products in colors that are a tone lower than the original one. But you can also highlight it. Especially if your product was white and turned yellow over time. In this case, there are two options: either make the fur dark, or try to return the color that was when you purchased it.

Determining the color scheme of fur

We will consider the first option later. And in order to return the white color, you can purchase paint that is used for suede products. They are sold in cans. There is no need to paint along the entire length; only the ends can be treated. Spray the composition of the can at a distance of 60-70 cm. Try to apply it to all visible areas. To prevent fur from sticking together, comb the product immediately after the procedure.

Recipes for paint solution

Before you dye your fur at home, you first need to prepare it for this. Remember that paint does not work well on dirty or greasy items. It just won't penetrate deep. So first clean the item of dirt and grease. In this case, two types of solution are used. First: 1 liter of water, ammonia 25%, about 6-7 grams, add 20 g of salt and 1-2 grams of baking soda. It is advisable to add another 1 g of detergent. Then soak the product for an hour, stirring it occasionally, then wring it out and rinse thoroughly with water.

Basic recipes for painting

Second option: dilute half a kilo of slaked lime in 10 liters of water, add about 150 grams of alum and about 250 grams of iron sulfate. There are many more options, these are some of the most popular. You can simply wash the item with laundry soap. Even shampoo for oily hair will do. Just don't rub too hard to avoid damaging the fur. Please note that in order to dye fur at home, you need to take care of the skin itself.

Solutions can deplete it. To prevent this situation, you should first apply glycerin or fatty cream to the wrong side. After cleaning, the item is fixed on a flat surface. The skin needs to be stretched a little. On the same surface, the fur should be completely dry.

Method of dyeing fur yourself

If you decide to change the color of a product globally, you should first bleach it. Do you think it's difficult? No, it's very similar to hair dyeing. The procedure is approximately the same. Afterwards, lighten the color after dyeing and bring it as close as possible to the color indicated on the package. You can, of course, use regular peroxide. Before you dye your fur at home, do a little experiment. Apply hair dye of the selected color to a small area that is not visible when worn.

Paint the house

This way you can evaluate the appearance of the product after the procedure. Don’t risk resorting to changing the whole thing at once. All paint manufacturers write that the final result may differ from that indicated. Especially if the fur is initially very dark. So, how to dye fur at home? Protect your hands with gloves and apply quickly. See if all areas have been treated. You need to soak the paint for as long as indicated in the instructions. After the procedure, rinse the dyed fur with water.

Fur dyeing at home

You can make a solution from water and vinegar. Just like after coloring your hair, you need to apply a balm. This addition will give a beautiful shine and shine to the fur. And rinse again with water. Dry gently using a towel. You can make the color completely unique by using the method used for highlighting. More precisely, paint only some areas and wrap them in foil. The result is specks of a different color against the background of the main one. Your clothes will be unusual, original and eye-catching.

After painting the color will be irresistible

The product treated in this way must be cared for as before. The effect after the procedure lasts about 8 months. Further color depends on both the type of fur and the product that was used. So the procedure will have to be repeated again. But with the experience gained, it will be much easier. And you can easily choose the appropriate color, practice and create something completely extraordinary.

Natural fur and its dyeing

Painting natural fur has its own characteristics. For example, the Arctic fox successfully maintains color and lends itself well to such experiments. And the mink is already worse. The beaver reacts to lightening with a yellow color, and the muskrat will surprise you with an unusual peach shade with a white bottom. Over time, the paint fades and takes on a completely different look. A dark solution of potassium permanganate will help restore the fox's brown tint.

Suede paint should be used if and only if you do not want to dye the entire fur. It will help give a new shade only to the ends of the fur and nothing more. So you learned the basic ways to restore things to their former beauty. Based on your experience of dyeing your own hair, if you have had one, choose a dye. It’s too cheap and may lose its appearance in just a week, so you shouldn’t skimp on such an important matter. You can learn more about how fur is dyed from the video.

Natural fur will conquer anyone

There are many salons and dry cleaners where you can apply for fur dyeing procedures. There, a professional will take care of your favorite thing. After everything is ready, carefully inspect the result to ensure it matches your wishes. Be careful and don’t rush to run home in joy, first evaluate the product.

Video

Happy owners of fur items know that they fade over time. To restore color, you don’t have to turn to professionals for help - you can do it at home. Knowing how to dye fur, you will give the product a second life at minimal cost.

Preparation

Before proceeding directly to painting, the fur must be prepared. Clean it thoroughly from dust and dirt so that the paint adheres well. For these purposes, you can use an alkaline solution.

For a liter of water you need to take the following components:

Mix all ingredients to obtain a homogeneous mass. It is convenient to apply it with a brush. Be sure to wash off the product. You can also use another composition: combine water, vinegar, and alcohol in equal proportions.

The wrong side, the inner side, also needs to be processed. It is necessary to apply glycerin or fatty cream to it.

This will prevent skin deformation. The fur must be pinned to a board so that the item does not lose its shape during the process of dyeing and drying.

If the interior is poorly painted, it will “shine”, creating the effect of sparse fibers. It can be tinted from the inside out. How to paint the inside of the fur? You can use a special product or apply hair dye after testing it on an inconspicuous area.

Using hair dye

It is often used to color arctic foxes. It is quite dense, so it is better to buy two or three packages so that the color is rich and uniform.

Before applying the composition to the entire surface, test it on a small piece.

You can see how it “behaves” when interacting with chemicals. Choose a paint one or two shades darker than the natural color - it will make its color richer.

If a thing has turned yellow, it is better not to paint it, but to lighten it. This can be done using hydrogen peroxide. Only after this is it necessary to apply the coloring composition of the appropriate shade.

How to apply paint?

Spray paint

Owners of items made from arctic fox fur sometimes notice that the tips begin to turn yellow. To restore the original appearance, it is not necessary to paint the entire product; it is enough to use suede paint from an aerosol can.

Is it possible to dye mink products?

Real fur is always in fashion. But over time, stylish mink items lose their rich color and shine. How to dye fur at home? There is nothing difficult about this if you follow the basic rules.

Often women dye their mink with regular hair dye. Before applying the composition, mink fur must be prepared in the same way as arctic fox fur. To make the procedure easier, you can use an aerosol or spray bottle. Spray the product at a distance of approximately 70 cm. Do not forget to comb the hairs with a brush or at least rub them with your hands. To dry, you can use a hairdryer or allow it to dry naturally. Hair balm applied to the surface will give shine and softness. Be sure to rinse it off thoroughly.

How to dye faux fur

Products made from it are very popular due to their attractive appearance and reasonable cost. But over time faux fur needs painting.

1. If you want to radically change the color of the product, choose hair dye with a high degree of durability. To refresh the shade, a tinting shampoo is suitable.
2. Pre-clean the product from dust and dirt with a swab soaked in shampoo. Apply the coloring composition to a small area to evaluate the result.
3. In order for the entire surface to be painted well, the product must be well stretched and fixed. Run the brush in the direction of the grain, grabbing the fabric as well. Follow the dyeing time specified in the instructions and rinse the fur thoroughly. Brush the wet bristles with a brush and let the product dry.

If you know how to dye real or faux fur, your items will always look fresh and neat.

Products made from natural fur are always a priority for women, because it is beautiful, expensive and prestigious. But what if something goes wrong with your favorite fur coat, it gets faded in the sun, or paint gets on it? It doesn’t matter - after all, it’s quite possible to dye natural fur even at home. In order to dye natural fur, you will need the most ordinary hair dye. The choice of color palette in this case is not limited: from fiery red to coal black. Just remember that after this dyeing, the color of the fur lasts up to eight months, after which the red one fades and fades, and the black one turns into dark brown and gradually turns red. You can also try to lighten the fur, but the result may be quite unexpected: the muskrat becomes soft peach with a white undercoat, and the beaver turns yellow.

Before painting it is worth doing a little preparatory work. The core (the bottom layer of the skin) should be soaked in rich cream, thus preventing it from drying out. Apply the paint to pre-moistened fur - the color will look deeper and lie more evenly. If you do not want to radically change the shade of the fur, then you should generally dry it slightly - the color will be less intense.

After applying the dye, carefully remember the fur with your hands, rubbing the dye over the entire surface. Make sure there are no unpainted areas. Leave the product for the same time as when dyeing your hair, that is, 30-35 minutes.

After waiting the required time, wash off the paint under a powerful stream of water. You can keep the skin in a saline solution for several minutes so that the color lasts longer and the hairs shine in the sun. Gently wring out the fur - you can lay it out on the bathroom wall and intensively run your hand over it several times.

Then lay the skin on a surface to dry. It is better to let it drain and dry on its own. Comb the fur in the desired direction.

Advice from Osinka.
Skin coloring. Cheap skins, with appropriate processing and coloring, can look like expensive furs. Previously, dyeing furs was a very complex matter: it was done using various mordants from chromium, iron and copper sulfate, etc. The introduction of aniline dyes into practice significantly simplified production, increased color strength and the range of shades obtained.

When using aniline dyes, color appears on the fibers with the help of oxidizing agents, such as sodium perborate, hydrogen peroxide, etc. Sodium perborate is more convenient than hydrogen peroxide, it does not decompose so quickly and is cheaper.

2. Aniline dyes for skins. Skin coloring can be done in two ways. According to the first method, the entire skin is immersed in a dye bath (immersion dyeing), according to the second, the dye liquid is applied to the hair with a brush (direction).

If the skins are rich in fat, then before painting they should be treated with the following mixture: 500 g of slaked lime, 250 g of iron sulfate, 150 g of alum per 10 liters of water. Apply the mixture with a brush, after which the skins are dried and washed well several times in water. Thanks to this treatment, the hair is degreased and easier to color.

For skins that are less fatty, you can wash them using a solution of soda (6° according to B.) and soap. The use of caustic soda should be avoided.

One more tip.
First of all, we process the mesh as follows. Apply ordinary glycerin (not too much or too little) to the surface of the mesh carefully so as not to touch the fur fibers at the edges. We buy ordinary hair dye of the desired color (note that the colors when dyeing light fur correspond completely to the sample on palette of colors) henna - there will be red fur, basma - dark green. When the glycerin has absorbed a little, take a board and use sewing pins to pin the fur around the perimeter, and paint according to the instructions attached to the selected paint. Wash off after a specified time with a shower without removing from the board. Gently blot with a towel and dry it with a hairdryer. Done! If you want to make spots of a different color, then wrap the painted areas in foil, there will be a beautiful spot.

Painting tip.
I am writing at the request of workers on the eve of winter.
We dye the fur, in my case there was a collar.
The dyeing technology is simple - we rip off the collar so that there is only fur, no fabric, etc.
We take hair dye - I took Garnier Phytolinia black (it gave the best result), dilute the paint - I used the entire bottle on a large collar, and apply the paint on a board dressed in a plastic bag with an old toothbrush.
There is a catch here - the fur is thick, the arctic fox, the mink are painted worse than the marmot - the undercoat is stained everywhere. It takes a long time and tediously to move the brush in different directions in order to evenly distribute the paint.
Leave for the time indicated on the paint bottle. Periodically comb the fur with a brush to make it more even.
Rinse off in the shower and apply (if available) balm. We wash it off again. And then we pin the wet fur along the edge of the skin onto the board with needles. Let's dry it. I removed it from the board when the fur was dry and the flesh was semi-dry. During the drying process, I brushed it with a clothes brush. Then I dried it in air.
At the end, it would be good to spread the flesh with glycerin, or hand cream, or just sunflower oil.
Well, then - sew! Smile
The main thing is not to dry it with a hairdryer, and not to let it dry without tension - my mink shrank after this, began to tear, in general - I ruined the fur.
But if everything is done well, my brown marmot has become completely black, soft and smells like a pleasant balm.
I wish you good luck!

Over time, any fur products begin to fade. Learn how to dye fur at home and you can restore it to its original color.

Preparing for painting

In order for the fur to be dyed well, the product must be pre-treated, clearing it of dirt and dust. To do this, you will need a solution of 15 g of salt, 15 g of soda, 5 g of ammonia and 7 ml of detergent. Mix all these ingredients and apply with a brush to the fur product. Rinse off any remaining solution. If the necessary ingredients are not at hand, prepare a solution of vinegar, alcohol and water (proportions 1:1:1). Treat your fur with the resulting mixture, and then wipe it with a clean, damp brush.

Do not forget to treat the inside of the product before painting. To prevent deformation during work, wipe the backside with greasy cream or glycerin.

Paint for fur products

Since natural fur is similar in structure to human hair, it is recommended to dye it using hair coloring compounds. Don't save money. The higher quality and durable paint you buy, the better results you will be able to achieve. Try to choose a shade 1-2 shades darker than the existing base color. Trying to paint too lightly can give the most unexpected results, so if you want to achieve a lighter color, it is better to turn to a professional.

In order to return the natural color to white fur that has yellowed over time, first lighten it before dyeing. To do this, treat the villi with hydrogen peroxide. Do not over-expose the peroxide, otherwise the villi may deteriorate.

Fur dyeing

Test the dye on a small area, and if you are satisfied with the test result, proceed to dye the fur. Put gloves on your hands. Dilute the paint according to the instructions on the package. Apply the composition with a brush to the entire surface, and then rub it with your hands. This will allow you to paint the fur more evenly.

Let the paint soak in accordance with the manufacturer's instructions, and then rinse with warm water and vinegar. This will allow you to consolidate the result. You can additionally add silkiness and shine to natural fur. Using a brush, apply hair conditioner to the dried fur and leave it to absorb according to the instructions. After this, rinse the product thoroughly, removing any unabsorbed product residue, and dry again. The results of such painting will last for about six months, after which the procedure should be repeated.

When a woman is puzzled by a question "How to update faux fur" this means one of two things: I want to restore a decent appearance to my fur coat (or handbag) and continue to wear the refreshed item; or paint and cut into pieces for crafts. Well, both options have a right to exist). To implement the first one, it is enough to wash Eco-fur. The second one is a little more difficult, but I will try to help you paint Eco-fur quickly and easily. This will be discussed below.

We paint and wear)

Be patient, be careful and careful, follow the paint manufacturer's instructions and as a result, you will receive a fashionable updated wardrobe item right at home.

We dye faux fur. Preparatory stage.

• To ensure that the product has an even color, it must be clean and dry. If it is a small item, like a bag or a hat, wash the entire item about a day before dyeing (). If washing is not possible or it is an oversized fur coat or jacket, simply dry clean it. All dirt and grease must be removed. By the time of painting, the item must be completely dry.
• The wrong side of the fabric of the “experimental” coat with thick cream(for hands or face) or glycerin. The fabric will become softer and more elastic, which will prevent possible tears.
• So that the item does not shrink, does not stretch and is painted evenly, it must be secure to a table, wooden cutting board or chair(depending on size), having previously covered them with thick film. Can be purchased at gardening or construction stores. Use clothespins, stationery pins, or tacks. If you have completed the previous step with lining the inside out, there is no need to worry.

You need to prepare not only the thing, but also yourself.

• Wear clothes that you don’t mind getting dirty, tidy up your hair, wear gloves, if the smell of paint is pungent, use a respirator.
• Cover the floor oilcloth or newspapers in places where you might accidentally drip paint.
• Kick your pets out of the room and ask your pets not to disturb you.
• Prepare the necessary tools: flat wide synthetic brushes, a container for paint (not metal!), sponges, rags, a flat comb or a clothes brush.

What paints are needed for Eco-fur?

To choose the right coloring method, you need to know what your fur coat is made of. There are different paints for different compositions. The information must be indicated on the manufacturer's label. Most often it is acrylic and/or polyester.

If you want to paint a thing once and for all, then use these methods.

Hair dye

The most popular method is coloring with it. She easily takes any type of fur. It's no harder to do than your own hair.

Choose a brand to your taste

The only difference is that it is more convenient (you cannot remove your head and put it on the table) and more difficult due to the amount of work. Otherwise, everything is as usual.

• If you want to repaint completely Having changed the color, choose colors that are brighter and darker than the current color of the product.
• If you just tint or just to refresh the color - look at tint-resistant paints that are close to the tone of your item.
• Necessarily buy good quality paint. Do a test by painting a small piece in an inconspicuous area or on a piece of similar material. If the color suits you, go ahead).
• Thin the paint according to instructions, then carefully paint the fur layer by layer. Move the brush along the pile, pressing lightly to reach the base. It must also be painted.
• Leave the product for the required amount of time so that the pigment is fixed in the fibers.
• Then wash off the dye and dry the fur. Here is a detailed video about how to dye fur at home. It stars natural fur, but with the same success it can be replaced with eco-fur)
• The plus is that you will know the color for sure(it’s on the package) and this is a common procedure for many women.

Paints for cold batik or acrylic in an alcohol solution.

The composition is simple: 70% vodka, 30% water and as much paint as you want. Soak the fur in the resulting solution for 10-15 minutes under pressure. You need to constantly check the color. When it triples you, rinse with table vinegar added to the water.

The intensity of the color depends on the amount of dye and the exposure time.

Special paints for synthetics.

Just do everything according to the instructions on the package.
It is important that the composition of the base and fibers of your fur coat is included in the list of those allowed for painting, otherwise you can ruin everything. note that paints must be suitable for water 40°C, maximum 50°C, Synthetics cannot be processed in hot solutions! If you have not found paints suitable for these conditions, use other methods, for example, folk ones.

Folk methods of permanent dyeing Ecofur. Fukortsin, Zelenka and Iodine.

I came across information that craftsmen dye faux fur with the pharmaceutical product “Fukortsin” in order to get pink or burgundy shades depending on the concentration of the solution. This is a dark red antiseptic liquid for external use. They write that the color lasts well and does not wash off.

• A large container, like a basin, is filled with water no warmer than 40°C so that the product does not deform.
• Next, pour the required amount of Fukortsin into the water at a rate of approximately 1 jar per liter of water.
• Fully We immerse the product in a basin with a dyeing liquid, and put pressure on top, which is not a pity, so that every hair of the product is in the solution. Check the color every 5-10 minutes. When you are completely satisfied with it, take out the item and begin to gently rinse it in a large amount of water at room temperature. To fix the color during the last rinses, add a tablespoon of 6% or 9% vinegar to the water.

Fukortsin takes anything and almost instantly, so the color intensity directly depends on the time spent in the basin. After about 1 minute, the white will turn into soft pink, after 5 - pale fuchsia, after 15 - red, and so on.

Interestingly, if you add brilliant green to the Fukortsin solution (about 0.5 tsp per liter of water, again “to taste”), you can “take away” the color from red in lilac and even purple shades. And if you use only brilliant green or only iodine, you can achieve emerald and yellow-brown shades, respectively.

A little iodine and white will turn into ecru)

Lots of greenery and a stylish fur coat is ready)

Before painting I would carried out color tests, at least on a white cloth (cut into small pieces) from the same composition as the thing being painted.

Due to the “corrosiveness” of the dye, use a basin, tools, gloves, containers, who don't mind, because they will also become colored.

Pros such coloring are obvious: this cheap and the products are sold in any pharmacy. You can control the saturation and hue of the color yourself. These products can be mixed to create amazingly beautiful shades.

But there is also cons: In the reviews there were complaints about uneven coloring. I think it depends on the fabric - since, perhaps, the item was not completely in the water and therefore was dyed with streaks and gaps. I strongly recommend doing experimental dyeing on fabrics of similar composition.

The advantages of these paints are that they once and for all- I painted it once and forgot about it. You don't have to worry about getting caught in the rain - nothing will leak or smudge.

Temporary coloring - tinting.

As for “professional” products, these are hair tonics and shampoos. Everything is done exactly the same as with hair dye.

The folk method is painting with blue.

It must be chosen carefully. Good bluing does not stain and does not fade, otherwise, it’s better not to go out in the rain wearing such a product. The instructions are the same as for Fukorsin with Zelenka: soak in a dye diluted with water, constantly monitoring the color.

The final stage of all procedures is rinsing, applying balm and drying.

• Remove the retaining buttons and clothespins.
• Use large amount of water to wash away any excess dye. Don't forget to add a little vinegar to fix the color and shine of the fur.
• If the product is not allowed to be washed, stock up on sponges and, without removing the clamps, begin to carefully wash off the paint from the attached product. It will take time, but it will be worth it.
• Apply hair balm or conditioner to the fur, distribute it with massage movements and leave for 3 minutes.
• Wash the fur completely. Do it with gentle blotting movements, avoiding friction of the villi.
• The furs are not squeezed or twisted! To remove excess water, wrap the item in a large terry towel and squeeze lightly. The towel can be wrung out and repeated.
• Re-fasten already clean wet fur on the surface and comb your hair his round-toothed comb. While the item is drying, periodically approach it and comb it so that the pile is smooth and fluffy.
• You can finally remove the product “from the hook” only after complete drying so that she doesn’t “be led” in some direction that we don’t need. This golden rule- dried, then unfasten it from the table.

Useful notes.

• • It happens that the first time you didn’t manage to paint it the way you wanted - either the color was wrong, or the color didn’t go on smoothly.
    If this happened - repeat coloring after 10 days, this time it will definitely work out, because now you already have experience)
  • If you are a sophisticated fashionista and simple monochromatic dyeing of faux fur is too simple or boring for you, arm yourself with narrow sponges, thin brushes and stencils. Following the dictates of your imagination, create your masterpiece, even if it’s just specks of color.
    By the way, drawings can also be applied alcohol marker.

Be it a speck or a stripe)

• And if, when painting, you tie some parts of the product with strong nylon threads, then the final result you will get is very spectacular drawings. My parents (if not my grandparents) used to dye jeans and T-shirts this way. This trick will work if the paint is initially several shades darker than the item being painted.
• Another option for creative painting of Ecofur is from a distance of 40-70 cm (the distance is determined independently, “to your taste”). Then only the ends will be painted, and the base itself will remain the same. Immediately after dyeing, comb the fur so that the ends do not stick together - the paint dries quickly!

And finally - one interesting question.

What if you suddenly want to bleach dark fur, that is, lighten it. Let's say there was brunette fur, and I want blond. Can I use hair lighteners or is it dangerous for synthetics?
Maybe then it’s better to try bleaches specifically for synthetics? Still, a specially designed product should not harm faux fur, because, as a rule, these are delicate bleaches.

There were two questions, yes) But the meaning is the same - how to make white out of black... or at least gray. Is this possible? Does anyone have any thoughts on this? Maybe there are lucky women who succeeded?
Write in the comments, we will discuss)) I rub my hands in anticipation).

Readers rate the article